Comments on: So much stuff! So much love! https://www.fabtotum.com/so-much-stuff-so-much-love/ Wed, 30 Nov 2016 08:13:25 +0000 hourly 1 https://wordpress.org/?v=4.9.8 By: Marco https://www.fabtotum.com/so-much-stuff-so-much-love/#comment-4 Thu, 26 Sep 2013 08:00:56 +0000 http://fabtotum.cc/?p=206#comment-4 hi
Please read carefully the specs and the description over to IGG.
The coolant in the “making of” is on a machining done to build the fabtotum itself.that is another CNC machine alltogether.
FABtotum has no built-in coolant system.

Also, it’s not capable of heavy machining.
Print and mill is possible only in certain situations, but it’s an advanced usage of the machine. Software to manage both the types of machining is still missing from the scene.
You can use FABtotum to cut and mill light woods like balsa or plywood but yo can’t cut deep aluminium or steel.

the power supply will be 120v/240v compatible.

]]>
By: reugenen https://www.fabtotum.com/so-much-stuff-so-much-love/#comment-3 Sat, 21 Sep 2013 19:22:25 +0000 http://fabtotum.cc/?p=206#comment-3 I didn’t notice a “contact” email so I’m asking here.
I noticed in one of the videos that you use coolant, so we can assume that the enclosure is water tight to some degree.
And if we are using coolant how hard is it to clean the inside of the work area?
Are the motors coolant resistant or located well away from where chips and coolant could get to them?
Are the scanning elements removable or do they just get wet?
And cleaned before use?
Can you 3D print with coolant in the work area?
Can you print and mill alternatively say for a production job? In the same program?
Can you leave the print on the build bed and move it to another machine to do more subsequent operations?
120 Volts for the United States? Or voltage converter required.
So scan, remove program, load into another program, reload back onto the machine and then machine. Can this all be handled by the non-supplied computer easily? Or are there other considerations?
Thanks

]]>