, ,

FABtotum files for liquidation.

We regret to inform that following a stakeholders decision FABtotum SRL is putting the activity on hold and liquidating his assets voluntarily.

A rapid shifting market and lower sales from 2016 to 2018 have created a condition of unsure recovery and profitability, culminating in this decision.
Following the crash of consumer 3D printer sales in 2016-2017, the new products in the B2B market were still not performing well in terms of units sold, despite the appreciation for the products.
Potential investors were not willing to finalize an offer in a dwindling market and strategic partnerships were taking more than expected to gain momentum in a very competitive arena.
To avoid increasing the debt with investors, suppliers and banks a voluntary debt relief liquidation has been filed.

The liquidation procedure, officially and lawfully filed, will carry on until debt relief is completed.
Anticipating this situation sales via the FABtotum online Store have been stopped beforehand.

The online services will continue to operate in the next weeks, giving access to documentation and all the website.
Online Support and email support have been temporarily terminated.
A FABUI patch will release soon to allow “Local Access” of the FABtotum FABUI software (bypassing the FABID login automatically).
The FABtotum Github account will still  provide the open source code for all the FABUI software , the FABlin Firmware and FABtotum hardware.

While disappointing for everyone involved we hope with this measure to foster the conditions for FABtotum to continue making innovative solutions in the AM & 3D printing industry.
We would like to take this opportunity to thank our partners and you, our customers, for your past business and trust.
Last, would like to thank our staff for their daily commitment, dedication and teamwork.

FABteam

 

/by
,

Colibri Effect Contest’s winners and other stories

3D Printer Software Online and Open Source: FABUI COLIBRI

Time’s up!
Fairs are all gone (for the moment), Easter Egg has expired, the Printing Head PRO awaiting time is matter of days, Colibri Effect Contest is over. It’s definitely time to sum everything up!

 

1. Fairs and Shows
We have been roaming a bit around Italy and Europe: did you have the chance to meet us? We introduced our Printing Head PRO and Hydra. Have you read about them already? Have a first glimpse on our website!
People during the shows have always welcomed us and found our projects great. Some of you also joined us and discovered what we are working on, as well as the mentioned new products.
In the upcoming months we’ll try to be at other fairs: if we’re missing an important date let us know and if it is not 2017 maybe 2018 we’ll see us partecipating.

2. Printing Head PRO availability
Introduced a while ago, now it’s at the final tests stage. In a few days it will be added on the store: a newsletter will follow soon after. We’re proud of the results, as quality of the prints is higher than ever and range of filaments is widening up constantly.

3. Colibri Effect Contest is over
After a beta testing period where many of our friends and users have been helping us troubleshooting, the very first FABtotum Colibri 1.0 version is ready to be used by everyone. Many features have been added, checked, tested.
This means the contest we lauched on the same time has come to an end, we have the five winners’ names! Congratulations to:

@christopherwit
@florentmaye
@homahe
@AndrewKillian
@dr4Ke

We really want to thank them as they really helped the Dev Team. A constant flow of reports, feedbacks and advices have overwhelmed them: that’s the purpose of having an Open Source project. This is a benefit both for you and us: we can have a better result, you have a better product. Easy.
The winners will be contacted via email within 8th of May in order to organize the withdrawal of the prize.

Again, thanks for being such a great community: a particular mention goes to the member of the Forums as well. Keep up the good work! It is a true inspiration for us to see that many “old fellows” are still with us and use their FABtotums for completely different projects. Their help to others, also, is a helping hand for Support Team.
Summing up, this period has seen us busy: all the Team members had a full agenda. We still have a lot to tell though. We’ll be back in May with our Community Highlights (if you want to be featured write us), we’ll get you precise dates for the release of the Printing Head PRO and more is just yet to come. Meanwhile, stay tuned.

 

Cheers and congrats to the Colibri Effect Contest winners!
FABteam

/by
,

FABTOTUM’s Contest #2: The COLIBRI effect

3D Printer Software Online and Open Source: FABUI COLIBRI

Dear all,

last week COLIBRI left the nest and made its first flight around.
It has flown in many houses and reports are coming back: and that’s what we want to hear from you. How is it going? How is it behaving? Are you already playing with it?

colibryday1

 

The COLIBRI effect contest

Have you ever heard of the Butterfly Effect? Well, we want to see the COLIBRI one!

The FABUI COLIBRI is still beta, meaning we still need some days to see how it goes and adjust it where needed. Luckily, FABtotum has a great community around the world that can try and follow endless different paths that would require the Team too much time to replicate.

Start playing with us: we started together a while ago, it’s time to get together again and make FABUI COLIBRI better!
How to? Simply report us as much as you can, we’ll make a list and a chart of the most influential, active users and reward them. A free spool to the top 5 among you!

How to enter:
Visit the link below and add logs. The Team will review all the comments and feedbacks. The Team will then make a chart of the most interesting logs. Number and quality will then be mixed to get the final winners.

https://github.com/FABtotum/fabui-colibri/issues

 

Times and places:
The contest will officially start on 27th of March at 6pm (GMT+1) and will last until 31st March at 12am (GMT+1) . Winners will be announced with a newsletter between 3rd April and 25th April as soon as the list has been reviewed and.
Any FABtotum owner can partecipate from any place in the world.
Previous logs and reports will be as well counted if the publisher will partecipate.

Prizes:
The top 5 active users will receive a free spool between the standard PLA/ABS ones depending on availability. Winners will be contacted privately via email to check the details within 72h from the newsletter confirming the names.

 

Read the full Terms&Conditions here

 

 

Ready, steady, go!

 

FABtotum

/by
,

FABUI COLIBRI: the world first OS for 3Dprinting

3D Printer Software Online and Open Source: FABUI COLIBRI

FABUI COLIBRI is finally ready for its first steps in the world. From today, it’ll be available for dowload. After a first trial period, (the Beta test will last around 40 days) it will then pop up as update for everyone.
Want to try it immediately?
Join the revolution!

fabui_colibri_animated

 

All the FABtotum’s owners have got used to what the FABUI has always been: a web interface that linked the machine and the human. A webpage with a dedicated IP address that could guide the multipurpose device to run all the tasks required.

Well, not exactly. Today, after three years of development, the FABteam is ready to introduce you the very first Operating System for 3D printing: FABUI COLIBRI.
A brand new multipurpose tool for a multupurpose device. The FABtotum CORE and FABUI COLIBRI are the perfect match.
Linux derived, will set a new start and a long path that is yet to be created.
FABUI COLIBRI is the result of a long process: feedbacks from the users of the FABUI and a hard work of tests converted in a complete different experience. COLIBRI is built from the ground up for 3D printing thanks to the Team and all the FABtotum’s owners, who will as well be able to update their devices and join the revolution.

 

What makes FABUI COLIBRI so great?
It’s light, it’s fast, it’s stable. Just like the small animal FABtotum took the name from (colibri is the italian word for hummingbird; some species are called with the same word in english as well), the world’s first Operating System for 3D printing is studied to never leave the user and get him/her a best-ever experience.

Light: it only weights around 150mb and it has everything needed to start working. The file can easily be written on a micro SD (or standard SDs for “older” users) to switch from the FABUI to COLIBRI. Of course, it will be built-in on any new device and it is retro-compatible with all the existing units.

Fast: the first boot takes around 120 seconds, then only around 15 seconds for the next times. The white lights will tell to the user that everything is ready, just as usual. But faster. The FABtotum will be accessible to a standard IP address via Ethernet cable and can be as well connected via Wifi. With both solutions, the webpage will respond immediately to every command, from moving the axis or managing temperatures to uploading the files.

Stable: every Operating System has a recovery method and COLIBRI is developed to never fail. No more loss of files, no more troubles. The first ever OS for 3D printing is able to reboot in a click and fix itself so that the user is never left alone with a crashed system. The FABUI COLIBRI is meant to work continuously. It will as well always automatically update in the background (as long as the device is correctly connected to the net).

Not enough? It also comes with brand new algorithms which will better manage every print; it introduces pauses while printing, it adds a performing virtual visualisation, it has a 3D scanning function performing better than ever. Last but not least, any user will be able to update but also to downgrade both software and firmware should they need to (for instance if they develop a different interface they will always be able to use it no matter what direction FABtotum takes).

 

A simple and user friendly look
The FABUI COLIBRI just looks easy to be used. Main features and threads are clearly listed on the left menu. FABtotum’s owners will recognize the same structure laying behind the revisited one. The new skin is clearer and gets the focus on the most important threads.
Dashboard: the place where all the news are shared via our blog and social accounts. Community craetions are as well shown here.
Make: that’s how the tool and function is chosen. That’s where all the projects become live.
Jog: useful both to check the behaviour of the printer and for any special task.
Maintenance: here is where the user should go when it’s time to clean up, and/or to set the right filament.
Settings: need to fine tune your FABtotum? No problem, everything can be checked and calibrated. From the net to the Hybrid Bed.
These are only the main areas of the menu of course. Along with a more friendly interface, there’s another big change: the FABUI COLIBRI features three languages. English, italian, german. What about the others? Ask the community: having a big group of users around the world means that if FABtotum does not make it, someone else can. The Team will then review it and get it available for everyone.

jog colibri

 

A free spirit
The FABtotum remains an open-source for the greatest of its parts. FABUI COLIBRI has a dedicated area for the custom heads and plug-ins. Since the beginning of the company’s life, community creations have always been welcomed. With the introduction of the Head Development Kit the Team offered a new support hardware side. FABUI COLIBRI adds the chance to easily feature any DIY tool. The users who can develop additional parts will just need to set everything up and get the most out of their creation(s). FABUI COLIBRI adds a simplified tool that will open up to a preset list of plugins, such as the one for the Laser Head recently released, but as well leave space for ideas and suggestions from the world.
Just as for the languages, there are still many sides of the platform that can be enhanced and the Team is more than happy to receive feedbacks from the community.

 

3, 2, 1, GO!
The FABUI COLIBRI, also known as FABUI 1.0, is ready to be downloaded and tried. After a first round of feedbacks, it will then pop up as update for everyone. As said, it is a major change but will still work on every existing unit.
The FABtotum is a multipurpose device and FABUI COLIBRI is of course intended to work only with it. Every function available today – 3D printing, CNC milling, 3D scanning and Laser engraving – will benefit of improvements.

 

How to install it on your FABtotum:

FABUI COLIBRI is the first Operating System in the world completely developed for 3D printing. Completely developed by the FABteam, it will make everything fast and simple.
Here below you’ll find the steps to follow to install it on the FABtotum: compatible with every unit, it is built-in for new devices (starting from March 2017).

1. Download the latest image available:
http://update.fabtotum.com/colibri/armhf/images/sdcard_latest.zip
The file will be automatically saved on your computer as a zipped folder. Should your computer not recognize it, give it a try anyway.
2. Format an SD card (any kind/size will do):
make sure to use a FAT32 File System and label it as “Boot”.
3. Unzip the file you downloaded at step 1 making sure that:
a) the destination you select is the formatted SD;
b) no folder is created. The content of the .zip should be pasted directly in the main directory;
c) once done, you should see three folders (“bundles”, “earlyboot” and “overlays”) plus a series of files;
d) once done, you should see that the files just weight around 150mb.

folders_FABUI_Colibri_1.0

4. Insert the SD into the slot of the FABtotum:
a) when you do this, of course, the unit must be turned off;
b) if it’s the first time you open the electronic panel, make sure to firstly take the screw off from the bottom right. The remaining three points are magnets. This is valid for unit delivered until Jan 2017. Newer units will have screws on all the 4 points.
5. Connect to your FABtotum via Ethernet cable just as you did on the very first time.
6. Turn on your FABtotum:
you should hear a couple of “beeps” and lights will start blinking. They should stop in a minute more or less. If this does not happen, files might not be correctly copied on the SD. First, try to repeat operations. If this still does not solve, contact us via ticket system.
7. Get the blue lights:
when FABUI COLIBRI is ready to start its booting, leds will turn to a stable, electric blue.
8. Open your preferred browser and go to page 169.254.1.2:
a) first boot will take up to 1 minute: you’ll just need to follow the instructions on the screen and wait for all the files to correctly upload.
b) second setup will need you to fill in your details: register again with your email and password. Please avoid using the autofill provided by some browsers at this step. All the lines must be filled and have a white background;
c) make sure to use a valid email;
d) as for the languages, feel free to select your preferred one. Some pages are still available only in english for the very first release. Updates will later translate everything.
9. Follow the wizard:
FABUI COLIBRI will guide you step-by-step through the next steps. Make sure as well to recalibrate your FABtotum, reconnect to the net and simply run all the tasks just as you did when you received the unit.

 

Nice, now that COLIBRI is on your FABtotum, feel free to share with us your feedbacks and advices. But! Please use the below link so that the messages go straight to the Dev Team.
No ticket needed, no forum post, just here:
https://github.com/FABtotum/fabui-colibri/issues

 

We once again thank every person who helped us, even just using his/hers FABtotum.

 

Keep following us,
FABteam

/by